Antique Brunswick Regina Pool Billiards Table 9′ Amazing Coni

Antique Brunswick Regina Pool Billiards Table 9' Amazing Coni


Antique Brunswick Regina Pool Billiards Table 9' Amazing Coni


This table is a ball return 4.5 x 9′ workhorse. Featuring a vertical cut Mahogany field inlaid with various woods and Mother-of – Pearl inlays. The rails are very interesting Brazilian rosewood with highly unusual grain patterns. From the golden era of Pool table manufacture, this is one of the “Jumbo” style of table constructions. In essence a huge amount of wood is in this table. This table is ready to go and is a great playing table. All original and fully restored! This 4.5 x 9′ Regina by Brunswick was built near 1910. Features ribbon Mahogany with Mother of Pearl, Ebony and Maple inlays, plus beautiful rosewood rails with Mother of Pearl diamond sights. Classic “Chicago” style ball return. Technical Information: From the Billiard Table Catalogue 1922 & 1923. Design Patent June 9th, 1911; manufactured under 22 construction patents issued from 1900 to 1916. Carom, Pocket or Combination One of our new styles of billiard tables on which we have secured design patent because of originality and simplicity. It is a good medium grade of table that will certainly be very popular. Stock Sizes: 4 ½ x 9, 5 x 10 Wood and Finish: Furnished in either Quarter-sawed oak or handsomely finished mahogany. The oak is finished in our #6 medium or golden color and the mahogany in our regular No. 2 stock color, rubbed and polished finish, which means that after being given the ordinary cabinet finish it is hand-rubbed to a dull polish. This can be kept clean more readily than any other finish. The massive body of this table is what is known in our factory as the Jumbo frame work, which means that it has unusual strength and great durability. Top molding 5 in. X 3 3/8 in. Subframe 2 ¾ in. At top, 1 ½ in. At bottom x 10 ¼ in. Total frame 14 in. The frame work of this body is built up in what is technically known as compound construction-that is, various kinds of woods tongued and grooved together and double cross veneered on the outside and inside, the outer veneer being handsomely figured in oak or mahogany. Reinforcing blocks at side intersections 5 in. Wide x 2 in. Thick x 11½ in. Secured to end section by ½ in. Iron frame bolt reinforced by hardwood dowels. Square at base, tapering to 9½ in. Double cross stretchers 41 inches x 1 ¼ in. Thick x 6½ in. Braced into reinforcing block. Legs are built up of compound construction, tongued and grooved, doweled and reinforced by corner blocks, double cross veneered, inside and out, and rigidly built into end frame work of body. Leg cap 6 in. Square x 3 1/8 in. The wood construction is all of the very best quality, cabinet made and put together in a most thorough manner. All joints tongued and grooved, strongly doweled and glued firmly together. All mitres absolutely accurate. All corners and edges made perfectly smooth and true. Cushion Rails: Compound construction 5 x 1 ¾ inches thick, with facing 4 1/8 in x 2 ¼ inches, built up of various kinds of hardwoods of different grain to give strength and prevent its being affected by climatic changes. Invisible cushion bolts covered by what is known as Blind Cushion Rails, made in 5-ply thicknesses of material placed in an alternate run of grain with fancy figured veneer on the exterior. Cap rails 7/8″ thick x 2 7/8″. Rosewood top ¼ thick. Inlaid metal fancy name plate, 8 rail bolts on each side and 4 on each end of 4 ½ x 9 table, and 10 rail bolts on each side and 5 on each end of 5 x 10 table. Slate Bed: Bet quality Vermont slate, three pieces to the set. All joints secured with three brass dowels and sockets. No screw holes on playing surface. Regulation slate 1 thick. When so ordered, can be furnished with slate 1 ½” thick, 1″ slate, 1 1/8″ reinforced wood frame; 1 ½” slate, 1 ¾ reinforced wood frame. Cushions: This table can be furnished with any style Monarch perfect angle cushions. Pocket Irons: The pocket irons are our No. 6 style, which are countersunk in the ends of the cushion rails by means of brass sockets. Playing Equipment: The playing equipment furnished with the Regina is as ordered. CHECK OUT OUR OTHER ITEMS! The item “Antique Brunswick Regina Pool Billiards Table 9′ Amazing Coni” is in sale since Monday, September 28, 2015. This item is in the category “Sporting Goods\Indoor Games\Billiards\Tables”. The seller is “buffalobilliardsca” and is located in Petaluma, California. This item can be shipped to United States.

  • Brand: BRUNSWICK Balke Collender
  • Model: REGINA
  • Country/Region of Manufacture: United States
Share and Enjoy:
  • Digg
  • Sphinn
  • del.icio.us
  • Facebook
  • Mixx
  • Google
  • E-mail this story to a friend!
  • Furl
  • LinkedIn
  • Live
  • MySpace
  • Print this article!
  • Propeller
  • Reddit
  • description
  • Slashdot
  • Spurl
  • StumbleUpon
  • Technorati
  • TwitThis
  • YahooMyWeb

About The Author

admin

Other posts byadmin

Author his web site

30

09 2015

Comments are closed.