Thank You For Shopping With Nielsen’s Billiards. Nielsens Billiards – Joerackem. Monday through Friday 9:30 a. To 5:30 p. And Saturday 9:30 a. New 7′ Dynamo Ridgeback Rail Standard Edition Replacement Rails. Ridge back rails Standard Edition are manufactured of clear kiln-dried poplar hardwood. Cloth impregnated cushion facings. Flared and funneled t-nuts. The pocket openings for the Professional Edition Ridgeback rails are as follows. Corner pockets: 4 1/2″ mouth and 4 9/16″ throat. Side Pockets: 4 3/4″ mouth and 4″ throat. Please Note – Pocket size may vary due to table and/or model manufacturing tolerances. Pocket cushion facing thickness – 3mm. Each set of Ridgeback rails are made using state of the art equipment that assures the highest quality product from set to set. Their machinery was designed and manufactured to their specifications specifically to make the Ridgeback rails. This means precision and consistency throughout each production run. All components of each Ridgeback rails are the highest quality available, from the adhesives to the cushion facings. Here you can see the two layers of reinforcing cloth that are molded into the cushion facing membrane. This provides extra strength where the balls impact the ends of the rails and prevents the premature splitting of the cushion facing where the cushion and the wooden cushion block meet. Each cushion and cushion facing are precisely fitted to the cushion block and then finish sanded so that your finished recovering has a smooth seamless appearance rather than visible lines that can be seen through the cloth on rails using die cut and/or razor cut finishing processes. Again, attention to detail is what you can expect with Ridgeback rails. Each cushion facing is firmly bonded with adhesive and then reinforced with two heavy duty staples to keep it from sliding during the life of the rail. Each side pocket cushion facing and cushion block bottom is relief cut so that the rail can be firmly seated on the play surface when the hospital fold side pocket technique is used. Of course, you can cover the rail using the no-fold valley style treatment as well. Each cushion block blank is run through a molding machine with precisely ground knives that assure consistent and correct profiles for each style of table. The all-important alignment bead on the face is designed into each profile so that the cushions stay bonded at the correct height even after years of play. One important aspect of the alignment bead is that it provides support for the cushion rubber when patrons or guests sit on the table. On the back of the cushion block is the all-important ridge. This feature causes the rail to be firmly seated against the cabinet at the bolt-up points. Several advantages are that the rail plays better because there is less loss of energy during ball impact, the t-nut is less likely to pull through, which in turn prevents premature rail splitting. During the manufacturing process, the ridge is removed at the very end of each rail to allow for the necessary cloth folds and staples used during the covering process. You will be amazed how easily and beautifully Ridgeback rails are to recover! Only the highest quality t-nuts are used. Each t-nut is fitted into a hole that is precisely drilled on an automatic machine that positions the hole in the correct position longitudinally and vertically so that the rails bolt onto the table easily. The hole depth is also machine controlled so that the t-nut provides the most grip and resistance to pull-through possible. The Ridgeback and the t-nut are designed so that the t-nut has a solid bearing point against the cabinet. Each t-nut is flared, creating a guide for the rail bolt as it is being installed. Additionally, the flare prevents the t-nut from spinning or pushing out while the rails are being installed on the table. Most important note of all! – The most amazing thing about this rail is the ridge on the backside that goes end to end. The traditional valley OEM rail does not have this ridge through the middle making the cavity on the original Valley OEM rails hollow. By Ridgeback adding this ridge through the middle on the back when the rail bolts are installed, this ridge is now flushed up against the table making another point of contact which is right where the rail bolt goes into the rail. This produces a rail without the traditional thud that is present in the original OEM rails and quiets the table down and makes it play more like a regular table. The rails are quieter than the original OEM rails. UPS is not available to non continental US locations. Asia, Australia, Canada, Europe, Germany, Japan, Mexico, South America and United Kingdom. See our return and store policies here. Thank you for your interest in Nielsen’s Billiards. If you have any questions, please message us with your question. The item “7′ Dynamo Ridgeback Rails Standard Edition Replacement Rails for Dynamo Tbl” is in sale since Friday, August 31, 2018. This item is in the category “Sporting Goods\Indoor Games\Billiards\Tables”. The seller is “joerackem” and is located in Springfield, Illinois. This item can be shipped worldwide.
- Accessory Type: Replacement Rails
- Exact Table Size: 7 foot table RBR7DS
- NOT OEM: Not OEM, better than OEM
- PocketCushion facing thickness: 3mm (.12 inches)
- Table Size: 7 ft.
- Model: 7′ Dynamo Standard Edition
- Country/Region of Manufacture: United States
- MPN: Does Not Apply
- Brand: Ridgeback Rail
- Product Type: Standard Edition Ridgeback Rails
