Posts Tagged ‘replacement’

8′ Dynamo Ridgeback Rails League Edition RBR8DL Replacement Rails for Dynamo

8' Dynamo Ridgeback Rails League Edition RBR8DL Replacement Rails for Dynamo


8' Dynamo Ridgeback Rails League Edition RBR8DL Replacement Rails for Dynamo


8' Dynamo Ridgeback Rails League Edition RBR8DL Replacement Rails for Dynamo


8' Dynamo Ridgeback Rails League Edition RBR8DL Replacement Rails for Dynamo


8' Dynamo Ridgeback Rails League Edition RBR8DL Replacement Rails for Dynamo


8' Dynamo Ridgeback Rails League Edition RBR8DL Replacement Rails for Dynamo


Thank You For Shopping With Nielsen’s Billiards. Nielsen’s Billiards – Joerackem. Monday through Friday 9:30 a. To 5:30 p. And Saturday 9:30 a. New 8′ Dynamo Ridgeback Rail League Edition Replacement Rails. Ridgebackrails League Edition are specially designed for players who want a more challenging table but with a slightly more forgiving pocket openings. League Edition Ridgeback rails have a thicker cushion block that is made from specially designed bonded clear poplar. Each cushion block is comprised of multiple layers of wood collated from different parent boards thus having varying grain characteristics. This gives the cushion block additional strength, dimensional stability and mass so that the play and consistency are greatly improved. The pocket openings for the League Edition Ridgeback rails are as follows. Corner pockets: 4 7/8″ mouth and 4 3/8″ throat. Side Pockets: 4 3/4″ mouth and 4″ throat. Please Note – Pocket size may vary due to table and/or model manufacturing tolerances. Each set of Ridgeback rails are made using state of the art equipment that assures the highest quality product from set to set. Their machinery was designed and manufactured to their specifications specifically to make the Ridgeback rails. This means precision and consistency throughout each production run. All components of each Ridgeback rails are the highest quality available, from the adhesives to the cushion facings. Here you can see the two layers of reinforcing cloth that are molded into the cushion facing membrane. This provides extra strength where the balls impact the ends of the rails and prevents the premature splitting of the cushion facing where the cushion and the wooden cushion block meet. Each cushion and cushion facing are precisely fitted to the cushion block and then finish sanded so that your finished recovering has a smooth seamless appearance rather than visible lines that can be seen through the cloth on rails using die cut and/or razor cut finishing processes. Again, attention to detail is what you can expect with Ridgeback rails. Each cushion facing is firmly bonded with adhesive and then reinforced with two heavy duty staples to keep it from sliding during the life of the rail. Each side pocket cushion facing and cushion block bottom is relief cut so that the rail can be firmly seated on the play surface when the hospital fold side pocket technique is used. Of course, you can cover the rail using the no-fold valley style treatment as well. Each cushion block blank is run through a molding machine with precisely ground knives that assure consistent and correct profiles for each style of table. The all-important alignment bead on the face is designed into each profile so that the cushions stay bonded at the correct height even after years of play. One important aspect of the alignment bead is that it provides support for the cushion rubber when patrons or guests sit on the table. On the back of the cushion block is the all-important ridge. This feature causes the rail to be firmly seated against the cabinet at the bolt-up points. Several advantages are that the rail plays better because there is less loss of energy during ball impact, the t-nut is less likely to pull through, which in turn prevents premature rail splitting. During the manufacturing process, the ridge is removed at the very end of each rail to allow for the necessary cloth folds and staples used during the covering process. You will be amazed how easily and beautifully Ridgeback rails are to recover! Only the highest quality t-nuts are used. Each t-nut is fitted into a hole that is precisely drilled on an automatic machine that positions the hole in the correct position longitudinally and vertically so that the rails bolt onto the table easily. The hole depth is also machine controlled so that the t-nut provides the most grip and resistance to pull-through possible. The Ridgeback and the t-nut are designed so that the t-nut has a solid bearing point against the cabinet. Each t-nut is flared, creating a guide for the rail bolt as it is being installed. Additionally, the flare prevents the t-nut from spinning or pushing out while the rails are being installed on the table. Most important note of all! – The most amazing thing about this rail is the ridge on the backside that goes end to end. The traditional valley OEM rail does not have this ridge through the middle making the cavity on the original Valley OEM rails hollow. By Ridgeback adding this ridge through the middle on the back when the rail bolts are installed, this ridge is now flushed up against the table making another point of contact which is right where the rail bolt goes into the rail. This produces a rail without the traditional thud that is present in the original OEM rails and quiets the table down and makes it play more like a regular table. The rails are quieter than the original OEM rails. UPS is not available to non continental US locations. Asia, Australia, Canada, Europe, Germany, Japan, Mexico, South America and United Kingdom. Thank you for your interest in Nielsen’s Billiards. This item is in the category “Sporting Goods\Indoor Games\Billiards\Tables”. The seller is “joerackem” and is located in this country: US. This item can be shipped worldwide.

  • Table Size: 8 ft.
  • Model: 8′ Dynamo League Edition
  • Country/Region of Manufacture: United States
  • Product Type: League Edition Ridgeback Rails
  • Accessory Type: Replacement Rails
  • Exact Table Size: 8 foot table RBR8DL
  • NOT OEM: Not OEM, better than OEM
  • Brand: Ridgeback Rail

21

01 2022

8′ Pre Cut Billiard Pool Table Replacement Cloth Felt Fabric 75/25 DARK GREEN

8' Pre Cut Billiard Pool Table Replacement Cloth Felt Fabric 75/25 DARK GREEN



The Leisure L ine of billiard fabric from Imperial is the best value for the quality in the industry. With an 75/25 blend of wool and nylon it is a great weight for the commercial environment and the family table. Felt is 19-20 oz. And will fit 8′ tables. Bed Cloth = 51″ x 100″. Rail Cloth = 50″ x 5 1/2″ each (6 total). Leisure billiard fabric is a perfect choice at an even better price. Leisure felt is bathed in a stain resist a nt solution to ensure years of stain free play. This felt is pre-cut, including the rails, to make install easy! CHECK OUT OUR OTHER GREAT COLORS OF FELT. This item is in the category “Sporting Goods\Indoor Games\Billiards\Tables”. The seller is “funhomestuff” and is located in this country: US. This item can be shipped to United States.

  • Table Size: 8 ‘ Foot
  • Model: Leisure
  • MPN: Leisure Dark Green 8 ft
  • Brand: Imperial
  • Color: Dark Green

14

01 2022

8′ Valley Ridgeback Rails 5 Bolt Pro Edition RBR8V5BP Replacement Rails Valley

8' Valley Ridgeback Rails 5 Bolt Pro Edition RBR8V5BP Replacement Rails Valley


8' Valley Ridgeback Rails 5 Bolt Pro Edition RBR8V5BP Replacement Rails Valley


8' Valley Ridgeback Rails 5 Bolt Pro Edition RBR8V5BP Replacement Rails Valley


8' Valley Ridgeback Rails 5 Bolt Pro Edition RBR8V5BP Replacement Rails Valley


8' Valley Ridgeback Rails 5 Bolt Pro Edition RBR8V5BP Replacement Rails Valley


8' Valley Ridgeback Rails 5 Bolt Pro Edition RBR8V5BP Replacement Rails Valley


8' Valley Ridgeback Rails 5 Bolt Pro Edition RBR8V5BP Replacement Rails Valley


8' Valley Ridgeback Rails 5 Bolt Pro Edition RBR8V5BP Replacement Rails Valley


Thank You For Shopping With Nielsen’s Billiards. Nielsens Billiards – Joerackem. Monday through Friday 9:30 a. To 5:30 p. And Saturday 9:30 a. New 8′ Valley 5 Bolt Ridgeback Rail Professional Edition Replacement Rails. Ridgebackrails Professional Edition are specially designed for players who want a more challenging table that plays like a professional table. Professional Edition Ridgebackrails have a thicker cushion block that is made from specially designed bonded clear poplar. Each cushion block is comprised of multiple layers of wood collated from different parent boards thus having varying grain characteristics. This gives the cushion block additional strength, dimensional stability and mass so that the play and consistency are greatly improved. Pocket cushion facing thickness: 5.5mm. The pocket openings for the Professional Edition Ridgebackrails are as follows. Corner pockets: 4 1/2″ mouth and 4″ throat. Side Pockets: 4 3/4″ mouth and 4″ throat. Please Note – Pocket size may vary due to table and/or model manufacturing tolerances. Please Note – when covering the rails on the League Edition rails you will need 6 1/2 wide rail cloths. If you do not have 6 1/2 wide rail cloth this it will be difficult to get the needed complete wrap around of the cloth. It is possible to complete with standard 6 inch rail cloth, its just a bit tougher! Each set of Ridgeback rails are made using state of the art equipment that assures the highest quality product from set to set. Their machinery was designed and manufactured to their specifications specifically to make the Ridgeback rails. This means precision and consistency throughout each production run. All components of each Ridgeback rails are the highest quality available, from the adhesives to the cushion facings. Here you can see the two layers of reinforcing cloth that are molded into the cushion facing membrane. This provides extra strength where the balls impact the ends of the rails and prevents the premature splitting of the cushion facing where the cushion and the wooden cushion block meet. Each cushion and cushion facing are precisely fitted to the cushion block and then finish sanded so that your finished recovering has a smooth seamless appearance rather than visible lines that can be seen through the cloth on rails using die cut and/or razor cut finishing processes. Again, attention to detail is what you can expect with Ridgeback rails. Each cushion facing is firmly bonded with adhesive and then reinforced with two heavy duty staples to keep it from sliding during the life of the rail. Each side pocket cushion facing and cushion block bottom is relief cut so that the rail can be firmly seated on the play surface when the hospital fold side pocket technique is used. Of course, you can cover the rail using the no-fold valley style treatment as well. Each cushion block blank is run through a molding machine with precisely ground knives that assure consistent and correct profiles for each style of table. The all-important alignment bead on the face is designed into each profile so that the cushions stay bonded at the correct height even after years of play. One important aspect of the alignment bead is that it provides support for the cushion rubber when patrons or guests sit on the table. On the back of the cushion block is the all-important ridge. This feature causes the rail to be firmly seated against the cabinet at the bolt-up points. Several advantages are that the rail plays better because there is less loss of energy during ball impact, the t-nut is less likely to pull through, which in turn prevents premature rail splitting. During the manufacturing process, the ridge is removed at the very end of each rail to allow for the necessary cloth folds and staples used during the covering process. You will be amazed how easily and beautifully Ridgeback rails are to recover! Only the highest quality t-nuts are used. Each t-nut is fitted into a hole that is precisely drilled on an automatic machine that positions the hole in the correct position longitudinally and vertically so that the rails bolt onto the table easily. The hole depth is also machine controlled so that the t-nut provides the most grip and resistance to pull-through possible. The Ridgeback and the t-nut are designed so that the t-nut has a solid bearing point against the cabinet. Each t-nut is flared, creating a guide for the rail bolt as it is being installed. Additionally, the flare prevents the t-nut from spinning or pushing out while the rails are being installed on the table. Most important note of all! – The most amazing thing about this rail is the ridge on the backside that goes end to end. The traditional valley OEM rail does not have this ridge through the middle making the cavity on the original Valley OEM rails hollow. By Ridgeback adding this ridge through the middle on the back when the rail bolts are installed, this ridge is now flushed up against the table making another point of contact which is right where the rail bolt goes into the rail. This produces a rail without the traditional thud that is present in the original OEM rails and quiets the table down and makes it play more like a regular table. The rails are quieter than the original OEM rails. UPS is not available to non continental US locations. Asia, Australia, Canada, Europe, Germany, Japan, Mexico, South America and United Kingdom. 5:30 p. Thank you for your interest in Nielsen’s Billiards. This item is in the category “Sporting Goods\Indoor Games\Billiards\Tables”. The seller is “joerackem” and is located in this country: US. This item can be shipped worldwide.

  • Table Size: 8 ft.
  • Model: 8′ Valley 5 Bolt Professional Edition
  • Country/Region of Manufacture: United States
  • Product Type: Professional Edition Ridgeback Rails
  • Accessory Type: Replacement Rails
  • Exact Table Size: 8 foot table RBR8V5BP
  • NOT OEM: Not OEM, better than OEM
  • Pocketcushion facing thickness: 5.5mm (.22 inches)
  • Brand: Ridgeback Rail

11

01 2022

8′ Billiard Pool Table Replacement Felt ELIMINATOR Fabric Cloth TOURNAMENT GREEN

8' Billiard Pool Table Replacement Felt ELIMINATOR Fabric Cloth TOURNAMENT GREEN


8′ Pre Cut Pool Table Replacement Eliminator Cloth / Felt. The Eliminator billiard cloth is our finest. This cloth is made of a 75/25 wool/nylon blend. It is manufactured with one of the tightest weaves available to provide a traditional tournament fast roll. Eliminator cloth goes through a computer controlled weaving and dying process to ensure consistency through the entire piece of cloth. It is bathed in a stain resistant solution to ensure that you get years of vibrant color and stain free play. With an 75/25 blend it is a great match for the commercial environment pool room quality. And will fit 8′ tables. Bed Cloth = 51″ x 100″. Rail Cloth = 50″ x 5 1/2″ each (6 total). This felt is pre cut for 8′ tables, including rails, for making install easy! CHECK OUT OUR OTHER GREAT COLORS OF FELT. This item is in the category “Sporting Goods\Indoor Games\Billiards\Tables”. The seller is “funhomestuff” and is located in this country: US. This item can be shipped to United States.

  • Bundle Listing: No
  • Model: Eliminator Tournament Green 75/25
  • MPN: 2718
  • Brand: Eliminator
  • Table Size: 8′ Foot
  • Color: Tournament Green

09

01 2022

8′ Pre Cut Pool 8 Ft Billiard Table Leisure Replacement Cloth Felt Fabric Rust

8' Pre Cut Pool 8 Ft Billiard Table Leisure Replacement Cloth Felt Fabric Rust


Leisure Replacement Cloth Fabric Felt for 8′ Tables – Rust. The Leisure Line of billiard fabric from Imperial is the best value for the quality in the industry. With an 75/25 blend of wool and nylon, it is a great weight for the commercial environment and the family table! Felt is 19-20 oz. And will fit 8′ tables. Bed Cloth = 51″ x 100″. Rail Cloth = 50″ x 5 1/2″ each (6 total). Leisure billiard fabric is a perfect choice at an even better price. The Leisure line of billiard cloth is the best value in the market. All Leisure cloth is bathed in a stain resistant solution to ensure years of stain free play. The Leisure line of cloth is ideal for a commercial environment or the family table. Set includes cloth for one billiard table bed and rails. This is pre-cut for 8 foot tables. This item is in the category “Sporting Goods\Indoor Games\Billiards\Tables”. The seller is “funhomestuff” and is located in this country: US. This item can be shipped to United States.

  • Color: RUST
  • Model: Leisure Series Cloth Felt
  • MPN: 865
  • Country/Region of Manufacture: Mexico
  • Brand: Leisure Series Cloth Felt
  • Sport: Billiards
  • Table Size: 8′ Foot

05

01 2022

8′ Pre Cut Billiard Pool Table Cloth Replacement Felt Fabric TOURNAMENT GREEN

8' Pre Cut Billiard Pool Table Cloth Replacement Felt Fabric TOURNAMENT GREEN


8′ Pre Cut Billiard / Pool Table Cloth Felt / Fabric. Tournament Green The Leisure Line of billiard fabric from Imperial is the best value for the quality in the industry. With an 75/25 blend of wool and nylon, it is a great weight for the commercial environment and the family table. Felt is 19-20 oz. And will fit 8′ tables. Bed Cloth = 51″ x 100″. Rail Cloth = 50″ x 5 1/2″ each (6 total). Leisure billiard fabric is a perfect choice at an even better price. Leisure felt is bathed in a stain resist a nt solution to ensure years of stain free play. This felt is pre-cut for 8′ tables, including rails! The item “8′ Pre Cut Billiard Pool Table Cloth Replacement Felt Fabric TOURNAMENT GREEN” is in sale since Tuesday, September 18, 2012. This item is in the category “Sporting Goods\Indoor Games\Billiards\Tables”. The seller is “funhomestuff” and is located in Fort Gratiot, Michigan. This item can be shipped to United States.

  • Featured Refinements: Pool Table Fabric Felt
  • Model: Leisure
  • MPN: 8 ft. Leisure Tour Green
  • Brand: Imperial
  • Sport: Billiards
  • Table Size: 8′ Foot
  • Color: Tournament Green

09

10 2021

8′ Valley Ridgeback Rails Standard Edition RBR8VS, Replacement Rails for Valley

8' Valley Ridgeback Rails Standard Edition RBR8VS, Replacement Rails for Valley


8' Valley Ridgeback Rails Standard Edition RBR8VS, Replacement Rails for Valley


8' Valley Ridgeback Rails Standard Edition RBR8VS, Replacement Rails for Valley


8' Valley Ridgeback Rails Standard Edition RBR8VS, Replacement Rails for Valley


8' Valley Ridgeback Rails Standard Edition RBR8VS, Replacement Rails for Valley


8' Valley Ridgeback Rails Standard Edition RBR8VS, Replacement Rails for Valley


8' Valley Ridgeback Rails Standard Edition RBR8VS, Replacement Rails for Valley


Thank You For Shopping With Nielsen’s Billiards. Nielsens Billiards – Joerackem. Monday through Friday 9:30 a. To 5:30 p. And Saturday 9:30 a. New 8′ Valley Ridgeback Rail Standard Edition Replacement Rails. Ridge back rails Standard Edition are manufactured of clear kiln-dried poplar hardwood. Cloth impregnated cushion facings. Flared and funneled t-nuts. The pocket openings for the Standard Edition Ridgebackrails are as follows. Corner pockets: 5″ mouth and 4 5/8″ throat. Side Pockets: 4 3/4″ mouth and 4″ throat. Please Note – Pocket size may vary due to table and/or model manufacturing tolerances. Each set of Ridgeback rails are made using state of the art equipment that assures the highest quality product from set to set. Their machinery was designed and manufactured to their specifications specifically to make the Ridgeback rails. This means precision and consistency throughout each production run. All components of each Ridgeback rails are the highest quality available, from the adhesives to the cushion facings. Here you can see the two layers of reinforcing cloth that are molded into the cushion facing membrane. This provides extra strength where the balls impact the ends of the rails and prevents the premature splitting of the cushion facing where the cushion and the wooden cushion block meet. Each cushion and cushion facing are precisely fitted to the cushion block and then finish sanded so that your finished recovering has a smooth seamless appearance rather than visible lines that can be seen through the cloth on rails using die cut and/or razor cut finishing processes. Again, attention to detail is what you can expect with Ridgeback rails. Each cushion facing is firmly bonded with adhesive and then reinforced with two heavy duty staples to keep it from sliding during the life of the rail. Each side pocket cushion facing and cushion block bottom is relief cut so that the rail can be firmly seated on the play surface when the hospital fold side pocket technique is used. Of course, you can cover the rail using the no-fold valley style treatment as well. Each cushion block blank is run through a molding machine with precisely ground knives that assure consistent and correct profiles for each style of table. The all-important alignment bead on the face is designed into each profile so that the cushions stay bonded at the correct height even after years of play. One important aspect of the alignment bead is that it provides support for the cushion rubber when patrons or guests sit on the table. On the back of the cushion block is the all-important ridge. This feature causes the rail to be firmly seated against the cabinet at the bolt-up points. Several advantages are that the rail plays better because there is less loss of energy during ball impact, the t-nut is less likely to pull through, which in turn prevents premature rail splitting. During the manufacturing process, the ridge is removed at the very end of each rail to allow for the necessary cloth folds and staples used during the covering process. You will be amazed how easily and beautifully Ridgeback rails are to recover! Only the highest quality t-nuts are used. Each t-nut is fitted into a hole that is precisely drilled on an automatic machine that positions the hole in the correct position longitudinally and vertically so that the rails bolt onto the table easily. The hole depth is also machine controlled so that the t-nut provides the most grip and resistance to pull-through possible. The Ridgeback and the t-nut are designed so that the t-nut has a solid bearing point against the cabinet. Each t-nut is flared, creating a guide for the rail bolt as it is being installed. Additionally, the flare prevents the t-nut from spinning or pushing out while the rails are being installed on the table. Most important note of all! – The most amazing thing about this rail is the ridge on the backside that goes end to end. The traditional valley OEM rail does not have this ridge through the middle making the cavity on the original Valley OEM rails hollow. By Ridgeback adding this ridge through the middle on the back when the rail bolts are installed, this ridge is now flushed up against the table making another point of contact which is right where the rail bolt goes into the rail. This produces a rail without the traditional thud that is present in the original OEM rails and quiets the table down and makes it play more like a regular table. The rails are quieter than the original OEM rails. UPS is not available to non continental US locations. Asia, Australia, Canada, Europe, Germany, Japan, Mexico, South America and United Kingdom. See our return and store policies here. 5:30 p. Thank you for your interest in Nielsen’s Billiards. The item “8′ Valley Ridgeback Rails Standard Edition RBR8VS, Replacement Rails for Valley” is in sale since Thursday, July 21, 2016. This item is in the category “Sporting Goods\Indoor Games\Billiards\Tables”. The seller is “joerackem” and is located in Springfield, Illinois. This item can be shipped worldwide.

  • NOT OEM: Not OEM, better than OEM
  • Pocketcushion facing thickness: 3mm (.12 inches)
  • Table Size: 8 ft.
  • Product Type: Standard Edition Ridgeback Rails
  • Accessory Type: Replacement Rails RBR8VS
  • Model: 8′ Valley Standard Edition
  • Country/Region of Manufacture: United States
  • MPN: Does Not Apply
  • Brand: Ridgeback Rail
  • Exact Table Size: 8 foot table

23

02 2021

7′ Valley Ridgeback Rails 5 Bolt Pro Edition RBR7V5BP Replacement Rails Valley

7' Valley Ridgeback Rails 5 Bolt Pro Edition RBR7V5BP Replacement Rails Valley


7' Valley Ridgeback Rails 5 Bolt Pro Edition RBR7V5BP Replacement Rails Valley


7' Valley Ridgeback Rails 5 Bolt Pro Edition RBR7V5BP Replacement Rails Valley


7' Valley Ridgeback Rails 5 Bolt Pro Edition RBR7V5BP Replacement Rails Valley


7' Valley Ridgeback Rails 5 Bolt Pro Edition RBR7V5BP Replacement Rails Valley


7' Valley Ridgeback Rails 5 Bolt Pro Edition RBR7V5BP Replacement Rails Valley


7' Valley Ridgeback Rails 5 Bolt Pro Edition RBR7V5BP Replacement Rails Valley


7' Valley Ridgeback Rails 5 Bolt Pro Edition RBR7V5BP Replacement Rails Valley


Thank You For Shopping With Nielsen’s Billiards. Nielsens Billiards – Joerackem. Monday through Friday 9:30 a. To 5:30 p. And Saturday 9:30 a. New 7′ Valley 5 Bolt Ridgeback Rail Professional Edition Replacement Rails. Ridgebackrails Professional Edition are specially designed for players who want a more challenging table that plays like a professional table. Professional Edition Ridgebackrails have a thicker cushion block that is made from specially designed bonded clear poplar. Each cushion block is comprised of multiple layers of wood collated from different parent boards thus having varying grain characteristics. This gives the cushion block additional strength, dimensional stability and mass so that the play and consistency are greatly improved. Pocket cushion facing thickness: 5.5mm. The pocket openings for the Professional Edition Ridgebackrails are as follows. Corner pockets: 4 1/2″ mouth and 4″ throat. Side Pockets: 4 3/4″ mouth and 4″ throat. Please Note – Pocket size may vary due to table and/or model manufacturing tolerances. Please Note – when covering the rails on the League Edition rails you will need 6 1/2 wide rail cloths. If you do not have 6 1/2 wide rail cloth this it will be difficult to get the needed complete wrap around of the cloth. It is possible to complete with standard 6 inch rail cloth, its just a bit tougher! Each set of Ridgeback rails are made using state of the art equipment that assures the highest quality product from set to set. Their machinery was designed and manufactured to their specifications specifically to make the Ridgeback rails. This means precision and consistency throughout each production run. All components of each Ridgeback rails are the highest quality available, from the adhesives to the cushion facings. Here you can see the two layers of reinforcing cloth that are molded into the cushion facing membrane. This provides extra strength where the balls impact the ends of the rails and prevents the premature splitting of the cushion facing where the cushion and the wooden cushion block meet. Each cushion and cushion facing are precisely fitted to the cushion block and then finish sanded so that your finished recovering has a smooth seamless appearance rather than visible lines that can be seen through the cloth on rails using die cut and/or razor cut finishing processes. Again, attention to detail is what you can expect with Ridgeback rails. Each cushion facing is firmly bonded with adhesive and then reinforced with two heavy duty staples to keep it from sliding during the life of the rail. Each side pocket cushion facing and cushion block bottom is relief cut so that the rail can be firmly seated on the play surface when the hospital fold side pocket technique is used. Of course, you can cover the rail using the no-fold valley style treatment as well. Each cushion block blank is run through a molding machine with precisely ground knives that assure consistent and correct profiles for each style of table. The all-important alignment bead on the face is designed into each profile so that the cushions stay bonded at the correct height even after years of play. One important aspect of the alignment bead is that it provides support for the cushion rubber when patrons or guests sit on the table. On the back of the cushion block is the all-important ridge. This feature causes the rail to be firmly seated against the cabinet at the bolt-up points. Several advantages are that the rail plays better because there is less loss of energy during ball impact, the t-nut is less likely to pull through, which in turn prevents premature rail splitting. During the manufacturing process, the ridge is removed at the very end of each rail to allow for the necessary cloth folds and staples used during the covering process. You will be amazed how easily and beautifully Ridgeback rails are to recover! Only the highest quality t-nuts are used. Each t-nut is fitted into a hole that is precisely drilled on an automatic machine that positions the hole in the correct position longitudinally and vertically so that the rails bolt onto the table easily. The hole depth is also machine controlled so that the t-nut provides the most grip and resistance to pull-through possible. The Ridgeback and the t-nut are designed so that the t-nut has a solid bearing point against the cabinet. Each t-nut is flared, creating a guide for the rail bolt as it is being installed. Additionally, the flare prevents the t-nut from spinning or pushing out while the rails are being installed on the table. Most important note of all! – The most amazing thing about this rail is the ridge on the backside that goes end to end. The traditional valley OEM rail does not have this ridge through the middle making the cavity on the original Valley OEM rails hollow. By Ridgeback adding this ridge through the middle on the back when the rail bolts are installed, this ridge is now flushed up against the table making another point of contact which is right where the rail bolt goes into the rail. This produces a rail without the traditional thud that is present in the original OEM rails and quiets the table down and makes it play more like a regular table. The rails are quieter than the original OEM rails. UPS is not available to non continental US locations. Asia, Australia, Canada, Europe, Germany, Japan, Mexico, South America and United Kingdom. 5:30 p. Thank you for your interest in Nielsen’s Billiards. The item “7′ Valley Ridgeback Rails 5 Bolt Pro Edition RBR7V5BP Replacement Rails Valley” is in sale since Thursday, March 14, 2019. This item is in the category “Sporting Goods\Indoor Games\Billiards\Tables”. The seller is “joerackem” and is located in Springfield, Illinois. This item can be shipped worldwide.

  • Product Type: Professional Edition Ridgeback Rails
  • Model: 7′ Valley 5 Bolt Professional Edition
  • Country/Region of Manufacture: United States
  • Accessory Type: Replacement Rails
  • Exact Table Size: 7 foot table RBR7V5BP
  • NOT OEM: Not OEM, better than OEM
  • Pocketcushion facing thickness: 5.5mm (.22 inches)
  • Table Size: 7 ft.
  • MPN: Does Not Apply
  • Brand: Ridgeback Rail

16

10 2020

4 Brunswick Ball & Claw Pool Table Replacement Legs

4 Brunswick Ball & Claw Pool Table Replacement Legs


4 Brunswick Ball & Claw Pool Table Replacement Legs


4 Brunswick Ball & Claw Pool Table Replacement Legs


4 Brunswick Ball & Claw Pool Table Replacement Legs


4 Brunswick Ball & Claw Pool Table Replacement Legs


4 Brunswick Ball & Claw Pool Table Replacement Legs


4 Brunswick Ball & Claw Pool Table Replacement Legs


4 Brunswick Ball & Claw Pool Table Replacement Legs


4 Brunswick Ball & Claw Pool Table Replacement Legs


4 Brunswick Ball & Claw Pool Table Replacement Legs


4 Brunswick Ball & Claw Pool Table Replacement Legs


4 Brunswick Ball & Claw Pool Table Replacement Legs


CONDITION: Preowned/used- item is in overall good condition. Please refer to photos. The item “4 Brunswick Ball & Claw Pool Table Replacement Legs” is in sale since Wednesday, July 1, 2020. This item is in the category “Sporting Goods\Indoor Games\Billiards\Tables”. The seller is “harvest_pickers67″ and is located in Capac, Michigan. This item can be shipped to United States.

  • Brand: Brunswick
  • Model: Brunswick Tremont
  • MPN: Does Not Apply

25

07 2020

7′ Valley Ridgeback Rails Professional Edition, Mitered Corner Replacement Rails

7' Valley Ridgeback Rails Professional Edition, Mitered Corner Replacement Rails


7' Valley Ridgeback Rails Professional Edition, Mitered Corner Replacement Rails


7' Valley Ridgeback Rails Professional Edition, Mitered Corner Replacement Rails


7' Valley Ridgeback Rails Professional Edition, Mitered Corner Replacement Rails


7' Valley Ridgeback Rails Professional Edition, Mitered Corner Replacement Rails


7' Valley Ridgeback Rails Professional Edition, Mitered Corner Replacement Rails


7' Valley Ridgeback Rails Professional Edition, Mitered Corner Replacement Rails


7' Valley Ridgeback Rails Professional Edition, Mitered Corner Replacement Rails


7' Valley Ridgeback Rails Professional Edition, Mitered Corner Replacement Rails



Thank You For Shopping With Nielsen’s Billiards. Nielsens Billiards – Joerackem. Monday through Friday 9:30 a. To 5:30 p. And Saturday 9:30 a. New 7′ Valley Ridgeback Rail Professional Edition Replacement Rails For Mitered Corner Valley Tables. Ridgebackrails Professional Edition are specially designed for players who want a more challenging table that plays like a professional table. Professional Edition Ridgebackrails have a thicker cushion block that is made from specially designed bonded clear poplar. Each cushion block is comprised of multiple layers of wood collated from different parent boards thus having varying grain characteristics. This gives the cushion block additional strength, dimensional stability and mass so that the play and consistency are greatly improved. Pocket cushion facing thickness. The pocket openings for the Professional Edition Ridgebackrails are as follows. Corner pockets: 4 1/2″ mouth and 4″ throat. Side Pockets: 4 3/4″ mouth and 4″ throat. Please Note – Pocket size may vary due to table and/or model manufacturing tolerances. Please Note – when covering the rails on the Professional Edition rails you will need 6 1/2 wide rail cloths. If you do not have 6 1/2 wide rail cloth this it will be difficult to get the needed complete wrap around of the cloth. It is possible to complete with standard 6 inch rail cloth, its just a bit tougher! Your table Must have Mitered Corners in order for these rails to work for your Valley Table. MEASUREMENTS – Please take measurements of your existing rails to assure that the lengths of the rails as well as the bolt holes line up correctly, please note that the pro version rails will be just slightly longer and they will bolt up presuming that your the bolt holes are the same. Actual Measurements of This Set Shown Below. SIDE RAILS (4 Total) – Measures 36 3/4 inches long. From the CENTER bolt in ANY of the side rails to the bolt on either end of the same rail is 14 3/8 inches. END RAILS (2 Total) – Measures 37 1/4 inches long. From the CENTER bolt in EITHER of the end rails to the bolt on either end of the same rail is 15 1/8 inches. Each set of Ridgeback rails are made using state of the art equipment that assures the highest quality product from set to set. Their machinery was designed and manufactured to their specifications specifically to make the Ridgeback rails. This means precision and consistency throughout each production run. All components of each Ridgeback rails are the highest quality available, from the adhesives to the cushion facings. Here you can see the two layers of reinforcing cloth that are molded into the cushion facing membrane. This provides extra strength where the balls impact the ends of the rails and prevents the premature splitting of the cushion facing where the cushion and the wooden cushion block meet. Each cushion and cushion facing are precisely fitted to the cushion block and then finish sanded so that your finished recovering has a smooth seamless appearance rather than visible lines that can be seen through the cloth on rails using die cut and/or razor cut finishing processes. Again, attention to detail is what you can expect with Ridgeback rails. Each cushion facing is firmly bonded with adhesive and then reinforced with two heavy duty staples to keep it from sliding during the life of the rail. Each side pocket cushion facing and cushion block bottom is relief cut so that the rail can be firmly seated on the play surface when the hospital fold side pocket technique is used. Of course, you can cover the rail using the no-fold valley style treatment as well. Each cushion block blank is run through a molding machine with precisely ground knives that assure consistent and correct profiles for each style of table. The all-important alignment bead on the face is designed into each profile so that the cushions stay bonded at the correct height even after years of play. One important aspect of the alignment bead is that it provides support for the cushion rubber when patrons or guests sit on the table. On the back of the cushion block is the all-important ridge. This feature causes the rail to be firmly seated against the cabinet at the bolt-up points. Several advantages are that the rail plays better because there is less loss of energy during ball impact, the t-nut is less likely to pull through, which in turn prevents premature rail splitting. During the manufacturing process, the ridge is removed at the very end of each rail to allow for the necessary cloth folds and staples used during the covering process. You will be amazed how easily and beautifully Ridgeback rails are to recover! Only the highest quality t-nuts are used. Each t-nut is fitted into a hole that is precisely drilled on an automatic machine that positions the hole in the correct position longitudinally and vertically so that the rails bolt onto the table easily. The hole depth is also machine controlled so that the t-nut provides the most grip and resistance to pull-through possible. The Ridgeback and the t-nut are designed so that the t-nut has a solid bearing point against the cabinet. Each t-nut is flared, creating a guide for the rail bolt as it is being installed. Additionally, the flare prevents the t-nut from spinning or pushing out while the rails are being installed on the table. Most important note of all! – The most amazing thing about this rail is the ridge on the backside that goes end to end. The traditional valley OEM rail does not have this ridge through the middle making the cavity on the original Valley OEM rails hollow. By Ridgeback adding this ridge through the middle on the back when the rail bolts are installed, this ridge is now flushed up against the table making another point of contact which is right where the rail bolt goes into the rail. This produces a rail without the traditional thud that is present in the original OEM rails and quiets the table down and makes it play more like a regular table. The rails are quieter than the original OEM rails. Asia, Australia, Canada, Europe, Germany, Japan, Mexico, South America and United Kingdom. Thank you for your interest in Nielsen’s Billiards. The item “7′ Valley Ridgeback Rails Professional Edition, Mitered Corner Replacement Rails” is in sale since Monday, July 29, 2019. This item is in the category “Sporting Goods\Indoor Games\Billiards\Tables”. The seller is “joerackem” and is located in Springfield, Illinois. This item can be shipped worldwide.

  • Product Type: Professional Edition Ridgeback Rails
  • Corner Type: Mitered
  • Accessory Type: Replacement Rails
  • MEASUREMENTS – PLEASE: READ ITEM DESCRIPTION
  • Exact Table Size: 7 foot table
  • Model: 7′ Valley Professional Edition RBR7VP-M
  • Country/Region of Manufacture: United States
  • NOT OEM: Not OEM, better than OEM
  • MPN: Does Not Apply
  • Brand: Ridgeback Rail
  • Table Size: 7 ft.

02

05 2020