Billiards Tables

Thank You For Shopping With Nielsen’s Billiards. Nielsens Billiards – Joerackem. Monday through Friday 9:30 a. To 5:30 p. And Saturday 9:30 a. New 7′ Valley 5 Bolt Ridgeback Rail Professional Edition Replacement Rails. Ridgebackrails Professional Edition are specially designed for players who want a more challenging table that plays like a professional table. Professional Edition Ridgebackrails have a thicker cushion block that is made from specially designed bonded clear poplar. Each cushion block is comprised of multiple layers of wood collated from different parent boards thus having varying grain characteristics. This gives the cushion block additional strength, dimensional stability and mass so that the play and consistency are greatly improved. Pocket cushion facing thickness: 5.5mm. The pocket openings for the Professional Edition Ridgebackrails are as follows. Corner pockets: 4 1/2″ mouth and 4″ throat. Side Pockets: 4 3/4″ mouth and 4″ throat. Please Note – Pocket size may vary due to table and/or model manufacturing tolerances. Please Note – when covering the rails on the League Edition rails you will need 6 1/2 wide rail cloths. If you do not have 6 1/2 wide rail cloth this it will be difficult to get the needed complete wrap around of the cloth. It is possible to complete with standard 6 inch rail cloth, its just a bit tougher! Each set of Ridgeback rails are made using state of the art equipment that assures the highest quality product from set to set. Their machinery was designed and manufactured to their specifications specifically to make the Ridgeback rails. This means precision and consistency throughout each production run. All components of each Ridgeback rails are the highest quality available, from the adhesives to the cushion facings. Here you can see the two layers of reinforcing cloth that are molded into the cushion facing membrane. This provides extra strength where the balls impact the ends of the rails and prevents the premature splitting of the cushion facing where the cushion and the wooden cushion block meet. Each cushion and cushion facing are precisely fitted to the cushion block and then finish sanded so that your finished recovering has a smooth seamless appearance rather than visible lines that can be seen through the cloth on rails using die cut and/or razor cut finishing processes. Again, attention to detail is what you can expect with Ridgeback rails. Each cushion facing is firmly bonded with adhesive and then reinforced with two heavy duty staples to keep it from sliding during the life of the rail. Each side pocket cushion facing and cushion block bottom is relief cut so that the rail can be firmly seated on the play surface when the hospital fold side pocket technique is used. Of course, you can cover the rail using the no-fold valley style treatment as well. Each cushion block blank is run through a molding machine with precisely ground knives that assure consistent and correct profiles for each style of table. The all-important alignment bead on the face is designed into each profile so that the cushions stay bonded at the correct height even after years of play. One important aspect of the alignment bead is that it provides support for the cushion rubber when patrons or guests sit on the table. On the back of the cushion block is the all-important ridge. This feature causes the rail to be firmly seated against the cabinet at the bolt-up points. Several advantages are that the rail plays better because there is less loss of energy during ball impact, the t-nut is less likely to pull through, which in turn prevents premature rail splitting. During the manufacturing process, the ridge is removed at the very end of each rail to allow for the necessary cloth folds and staples used during the covering process. You will be amazed how easily and beautifully Ridgeback rails are to recover! Only the highest quality t-nuts are used. Each t-nut is fitted into a hole that is precisely drilled on an automatic machine that positions the hole in the correct position longitudinally and vertically so that the rails bolt onto the table easily. The hole depth is also machine controlled so that the t-nut provides the most grip and resistance to pull-through possible. The Ridgeback and the t-nut are designed so that the t-nut has a solid bearing point against the cabinet. Each t-nut is flared, creating a guide for the rail bolt as it is being installed. Additionally, the flare prevents the t-nut from spinning or pushing out while the rails are being installed on the table. Most important note of all! – The most amazing thing about this rail is the ridge on the backside that goes end to end. The traditional valley OEM rail does not have this ridge through the middle making the cavity on the original Valley OEM rails hollow. By Ridgeback adding this ridge through the middle on the back when the rail bolts are installed, this ridge is now flushed up against the table making another point of contact which is right where the rail bolt goes into the rail. This produces a rail without the traditional thud that is present in the original OEM rails and quiets the table down and makes it play more like a regular table. The rails are quieter than the original OEM rails. UPS is not available to non continental US locations. Asia, Australia, Canada, Europe, Germany, Japan, Mexico, South America and United Kingdom. 5:30 p. Thank you for your interest in Nielsen’s Billiards. This item is in the category “Sporting Goods\Indoor Games\Billiards\Tables”. The seller is “joerackem” and is located in this country: US. This item can be shipped worldwide.

• Product Type: Professional Edition Ridgeback Rails
• Model: 7′ Valley 5 Bolt Professional Edition
• Country/Region of Manufacture: United States
• Accessory Type: Replacement Rails
• Exact Table Size: 7 foot table RBR7V5BP
• NOT OEM: Not OEM, better than OEM
• Pocketcushion facing thickness: 5.5mm (.22 inches)
• Table Size: 7 ft.
• Brand: Ridgeback Rail

Thank You For Shopping With Nielsen’s Billiards. Nielsens Billiards – Joerackem. Monday through Friday 9:30 a. To 5:30 p. And Saturday 9:30 a. New 8′ Valley 5 Bolt Ridgeback Rail Professional Edition Replacement Rails. Ridgebackrails Professional Edition are specially designed for players who want a more challenging table that plays like a professional table. Professional Edition Ridgebackrails have a thicker cushion block that is made from specially designed bonded clear poplar. Each cushion block is comprised of multiple layers of wood collated from different parent boards thus having varying grain characteristics. This gives the cushion block additional strength, dimensional stability and mass so that the play and consistency are greatly improved. Pocket cushion facing thickness: 5.5mm. The pocket openings for the Professional Edition Ridgebackrails are as follows. Corner pockets: 4 1/2″ mouth and 4″ throat. Side Pockets: 4 3/4″ mouth and 4″ throat. Please Note – Pocket size may vary due to table and/or model manufacturing tolerances. Please Note – when covering the rails on the League Edition rails you will need 6 1/2 wide rail cloths. If you do not have 6 1/2 wide rail cloth this it will be difficult to get the needed complete wrap around of the cloth. It is possible to complete with standard 6 inch rail cloth, its just a bit tougher! Each set of Ridgeback rails are made using state of the art equipment that assures the highest quality product from set to set. Their machinery was designed and manufactured to their specifications specifically to make the Ridgeback rails. This means precision and consistency throughout each production run. All components of each Ridgeback rails are the highest quality available, from the adhesives to the cushion facings. Here you can see the two layers of reinforcing cloth that are molded into the cushion facing membrane. This provides extra strength where the balls impact the ends of the rails and prevents the premature splitting of the cushion facing where the cushion and the wooden cushion block meet. Each cushion and cushion facing are precisely fitted to the cushion block and then finish sanded so that your finished recovering has a smooth seamless appearance rather than visible lines that can be seen through the cloth on rails using die cut and/or razor cut finishing processes. Again, attention to detail is what you can expect with Ridgeback rails. Each cushion facing is firmly bonded with adhesive and then reinforced with two heavy duty staples to keep it from sliding during the life of the rail. Each side pocket cushion facing and cushion block bottom is relief cut so that the rail can be firmly seated on the play surface when the hospital fold side pocket technique is used. Of course, you can cover the rail using the no-fold valley style treatment as well. Each cushion block blank is run through a molding machine with precisely ground knives that assure consistent and correct profiles for each style of table. The all-important alignment bead on the face is designed into each profile so that the cushions stay bonded at the correct height even after years of play. One important aspect of the alignment bead is that it provides support for the cushion rubber when patrons or guests sit on the table. On the back of the cushion block is the all-important ridge. This feature causes the rail to be firmly seated against the cabinet at the bolt-up points. Several advantages are that the rail plays better because there is less loss of energy during ball impact, the t-nut is less likely to pull through, which in turn prevents premature rail splitting. During the manufacturing process, the ridge is removed at the very end of each rail to allow for the necessary cloth folds and staples used during the covering process. You will be amazed how easily and beautifully Ridgeback rails are to recover! Only the highest quality t-nuts are used. Each t-nut is fitted into a hole that is precisely drilled on an automatic machine that positions the hole in the correct position longitudinally and vertically so that the rails bolt onto the table easily. The hole depth is also machine controlled so that the t-nut provides the most grip and resistance to pull-through possible. The Ridgeback and the t-nut are designed so that the t-nut has a solid bearing point against the cabinet. Each t-nut is flared, creating a guide for the rail bolt as it is being installed. Additionally, the flare prevents the t-nut from spinning or pushing out while the rails are being installed on the table. Most important note of all! – The most amazing thing about this rail is the ridge on the backside that goes end to end. The traditional valley OEM rail does not have this ridge through the middle making the cavity on the original Valley OEM rails hollow. By Ridgeback adding this ridge through the middle on the back when the rail bolts are installed, this ridge is now flushed up against the table making another point of contact which is right where the rail bolt goes into the rail. This produces a rail without the traditional thud that is present in the original OEM rails and quiets the table down and makes it play more like a regular table. The rails are quieter than the original OEM rails. UPS is not available to non continental US locations. Asia, Australia, Canada, Europe, Germany, Japan, Mexico, South America and United Kingdom. 5:30 p. Thank you for your interest in Nielsen’s Billiards. This item is in the category “Sporting Goods\Indoor Games\Billiards\Tables”. The seller is “joerackem” and is located in this country: US. This item can be shipped worldwide.

• Table Size: 8 ft.
• Model: 8′ Valley 5 Bolt Professional Edition
• Country/Region of Manufacture: United States
• Product Type: Professional Edition Ridgeback Rails
• Accessory Type: Replacement Rails
• Exact Table Size: 8 foot table RBR8V5BP
• NOT OEM: Not OEM, better than OEM
• Pocketcushion facing thickness: 5.5mm (.22 inches)
• Brand: Ridgeback Rail

Thank You For Shopping With Nielsen’s Billiards. Nielsens Billiards – Joerackem. Monday through Friday 9:30 a. To 5:30 p. And Saturday 9:30 a. New 7′ Valley 5 Bolt Ridgeback Rail Professional Edition Replacement Rails. Ridgebackrails Professional Edition are specially designed for players who want a more challenging table that plays like a professional table. Professional Edition Ridgebackrails have a thicker cushion block that is made from specially designed bonded clear poplar. Each cushion block is comprised of multiple layers of wood collated from different parent boards thus having varying grain characteristics. This gives the cushion block additional strength, dimensional stability and mass so that the play and consistency are greatly improved. Pocket cushion facing thickness: 5.5mm. The pocket openings for the Professional Edition Ridgebackrails are as follows. Corner pockets: 4 1/2″ mouth and 4″ throat. Side Pockets: 4 3/4″ mouth and 4″ throat. Please Note – Pocket size may vary due to table and/or model manufacturing tolerances. Please Note – when covering the rails on the League Edition rails you will need 6 1/2 wide rail cloths. If you do not have 6 1/2 wide rail cloth this it will be difficult to get the needed complete wrap around of the cloth. It is possible to complete with standard 6 inch rail cloth, its just a bit tougher! Each set of Ridgeback rails are made using state of the art equipment that assures the highest quality product from set to set. Their machinery was designed and manufactured to their specifications specifically to make the Ridgeback rails. This means precision and consistency throughout each production run. All components of each Ridgeback rails are the highest quality available, from the adhesives to the cushion facings. Here you can see the two layers of reinforcing cloth that are molded into the cushion facing membrane. This provides extra strength where the balls impact the ends of the rails and prevents the premature splitting of the cushion facing where the cushion and the wooden cushion block meet. Each cushion and cushion facing are precisely fitted to the cushion block and then finish sanded so that your finished recovering has a smooth seamless appearance rather than visible lines that can be seen through the cloth on rails using die cut and/or razor cut finishing processes. Again, attention to detail is what you can expect with Ridgeback rails. Each cushion facing is firmly bonded with adhesive and then reinforced with two heavy duty staples to keep it from sliding during the life of the rail. Each side pocket cushion facing and cushion block bottom is relief cut so that the rail can be firmly seated on the play surface when the hospital fold side pocket technique is used. Of course, you can cover the rail using the no-fold valley style treatment as well. Each cushion block blank is run through a molding machine with precisely ground knives that assure consistent and correct profiles for each style of table. The all-important alignment bead on the face is designed into each profile so that the cushions stay bonded at the correct height even after years of play. One important aspect of the alignment bead is that it provides support for the cushion rubber when patrons or guests sit on the table. On the back of the cushion block is the all-important ridge. This feature causes the rail to be firmly seated against the cabinet at the bolt-up points. Several advantages are that the rail plays better because there is less loss of energy during ball impact, the t-nut is less likely to pull through, which in turn prevents premature rail splitting. During the manufacturing process, the ridge is removed at the very end of each rail to allow for the necessary cloth folds and staples used during the covering process. You will be amazed how easily and beautifully Ridgeback rails are to recover! Only the highest quality t-nuts are used. Each t-nut is fitted into a hole that is precisely drilled on an automatic machine that positions the hole in the correct position longitudinally and vertically so that the rails bolt onto the table easily. The hole depth is also machine controlled so that the t-nut provides the most grip and resistance to pull-through possible. The Ridgeback and the t-nut are designed so that the t-nut has a solid bearing point against the cabinet. Each t-nut is flared, creating a guide for the rail bolt as it is being installed. Additionally, the flare prevents the t-nut from spinning or pushing out while the rails are being installed on the table. Most important note of all! – The most amazing thing about this rail is the ridge on the backside that goes end to end. The traditional valley OEM rail does not have this ridge through the middle making the cavity on the original Valley OEM rails hollow. By Ridgeback adding this ridge through the middle on the back when the rail bolts are installed, this ridge is now flushed up against the table making another point of contact which is right where the rail bolt goes into the rail. This produces a rail without the traditional thud that is present in the original OEM rails and quiets the table down and makes it play more like a regular table. The rails are quieter than the original OEM rails. UPS is not available to non continental US locations. Asia, Australia, Canada, Europe, Germany, Japan, Mexico, South America and United Kingdom. 5:30 p. Thank you for your interest in Nielsen’s Billiards. The item “7′ Valley Ridgeback Rails 5 Bolt Pro Edition RBR7V5BP Replacement Rails Valley” is in sale since Thursday, March 14, 2019. This item is in the category “Sporting Goods\Indoor Games\Billiards\Tables”. The seller is “joerackem” and is located in Springfield, Illinois. This item can be shipped worldwide.

• Product Type: Professional Edition Ridgeback Rails
• Model: 7′ Valley 5 Bolt Professional Edition
• Country/Region of Manufacture: United States
• Accessory Type: Replacement Rails
• Exact Table Size: 7 foot table RBR7V5BP
• NOT OEM: Not OEM, better than OEM
• Pocketcushion facing thickness: 5.5mm (.22 inches)
• Table Size: 7 ft.
• MPN: Does Not Apply
• Brand: Ridgeback Rail

Thank You For Shopping With Nielsen’s Billiards. Nielsens Billiards – Joerackem. Monday through Friday 9:30 a. To 5:30 p. And Saturday 9:30 a. New 7′ Valley 5 bolt Ridgeback Rail Standard Edition Replacement Rails. Ridge back rails Standard Edition are manufactured of clear kiln-dried poplar hardwood. Cloth impregnated cushion facings. Flared and funneled t-nuts. The pocket openings for the Professional Edition Ridgebackrails are as follows. Corner pockets: 4 1/2″ mouth and 4 9/16″ throat. Side Pockets: 4 3/4″ mouth and 4″ throat. Please Note – Pocket size may vary due to table and/or model manufacturing tolerances. Pocket cushion facing thickness. Each set of Ridgeback rails are made using state of the art equipment that assures the highest quality product from set to set. Their machinery was designed and manufactured to their specifications specifically to make the Ridgeback rails. This means precision and consistency throughout each production run. All components of each Ridgeback rails are the highest quality available, from the adhesives to the cushion facings. Here you can see the two layers of reinforcing cloth that are molded into the cushion facing membrane. This provides extra strength where the balls impact the ends of the rails and prevents the premature splitting of the cushion facing where the cushion and the wooden cushion block meet. Each cushion and cushion facing are precisely fitted to the cushion block and then finish sanded so that your finished recovering has a smooth seamless appearance rather than visible lines that can be seen through the cloth on rails using die cut and/or razor cut finishing processes. Again, attention to detail is what you can expect with Ridgeback rails. Each cushion facing is firmly bonded with adhesive and then reinforced with two heavy duty staples to keep it from sliding during the life of the rail. Each side pocket cushion facing and cushion block bottom is relief cut so that the rail can be firmly seated on the play surface when the hospital fold side pocket technique is used. Of course, you can cover the rail using the no-fold valley style treatment as well. Each cushion block blank is run through a molding machine with precisely ground knives that assure consistent and correct profiles for each style of table. The all-important alignment bead on the face is designed into each profile so that the cushions stay bonded at the correct height even after years of play. One important aspect of the alignment bead is that it provides support for the cushion rubber when patrons or guests sit on the table. On the back of the cushion block is the all-important ridge. This feature causes the rail to be firmly seated against the cabinet at the bolt-up points. Several advantages are that the rail plays better because there is less loss of energy during ball impact, the t-nut is less likely to pull through, which in turn prevents premature rail splitting. During the manufacturing process, the ridge is removed at the very end of each rail to allow for the necessary cloth folds and staples used during the covering process. You will be amazed how easily and beautifully Ridgeback rails are to recover! Only the highest quality t-nuts are used. Each t-nut is fitted into a hole that is precisely drilled on an automatic machine that positions the hole in the correct position longitudinally and vertically so that the rails bolt onto the table easily. The hole depth is also machine controlled so that the t-nut provides the most grip and resistance to pull-through possible. The Ridgeback and the t-nut are designed so that the t-nut has a solid bearing point against the cabinet. Each t-nut is flared, creating a guide for the rail bolt as it is being installed. Additionally, the flare prevents the t-nut from spinning or pushing out while the rails are being installed on the table. Most important note of all! – The most amazing thing about this rail is the ridge on the backside that goes end to end. The traditional valley OEM rail does not have this ridge through the middle making the cavity on the original Valley OEM rails hollow. By Ridgeback adding this ridge through the middle on the back when the rail bolts are installed, this ridge is now flushed up against the table making another point of contact which is right where the rail bolt goes into the rail. This produces a rail without the traditional thud that is present in the original OEM rails and quiets the table down and makes it play more like a regular table. The rails are quieter than the original OEM rails. UPS is not available to non continental US locations. Asia, Australia, Canada, Europe, Germany, Japan, Mexico, South America and United Kingdom. See our return and store policies here. 5:30 p. Thank you for your interest in Nielsen’s Billiards. The item “7′ Valley 5 Bolt Ridgeback Rails Std. Edition, Replacement Rails for Valley Tbl” is in sale since Thursday, July 21, 2016. This item is in the category “Sporting Goods\Indoor Games\Billiards\Tables”. The seller is “joerackem” and is located in Springfield, Illinois. This item can be shipped worldwide.

• Exact Table Size: 7 foot table RBR7VS5BS
• NOT OEM: Not OEM, better than OEM
• PocketCushion facing thickness: 3mm (.12 inches)
• Table Size: 7 ft.
• Product Type: Standard Edition Ridgeback Rails
• Model: 7′ Valley 5-bolt Standard Edition
• Country/Region of Manufacture: United States
• MPN: Does Not Apply
• Brand: Ridgeback Rail
• Accessory Type: Replacement Rails

Thank You For Shopping With Nielsen’s Billiards. Nielsens Billiards – Joerackem. Monday through Friday 9:30 a. To 5:30 p. And Saturday 9:30 a. New 7′ Valley 5 Bolt Ridgeback Rail Professional Edition Replacement Rails. Ridgebackrails Professional Edition are specially designed for players who want a more challenging table that plays like a professional table. Professional Edition Ridgebackrails have a thicker cushion block that is made from specially designed bonded clear poplar. Each cushion block is comprised of multiple layers of wood collated from different parent boards thus having varying grain characteristics. This gives the cushion block additional strength, dimensional stability and mass so that the play and consistency are greatly improved. Pocket cushion facing thickness: 5.5mm. The pocket openings for the Professional Edition Ridgebackrails are as follows. Corner pockets: 4 1/2″ mouth and 4″ throat. Side Pockets: 4 3/4″ mouth and 4″ throat. Please Note – Pocket size may vary due to table and/or model manufacturing tolerances. Please Note – when covering the rails on the Professional Edition rails you will need 6 1/2 wide rails. If you do not have 6 1/2 wide rails this will cause the rail to not properly install on the table. Each set of Ridgeback rails are made using state of the art equipment that assures the highest quality product from set to set. Their machinery was designed and manufactured to their specifications specifically to make the Ridgeback rails. This means precision and consistency throughout each production run. All components of each Ridgeback rails are the highest quality available, from the adhesives to the cushion facings. Here you can see the two layers of reinforcing cloth that are molded into the cushion facing membrane. This provides extra strength where the balls impact the ends of the rails and prevents the premature splitting of the cushion facing where the cushion and the wooden cushion block meet. Each cushion and cushion facing are precisely fitted to the cushion block and then finish sanded so that your finished recovering has a smooth seamless appearance rather than visible lines that can be seen through the cloth on rails using die cut and/or razor cut finishing processes. Again, attention to detail is what you can expect with Ridgeback rails. Each cushion facing is firmly bonded with adhesive and then reinforced with two heavy duty staples to keep it from sliding during the life of the rail. Each side pocket cushion facing and cushion block bottom is relief cut so that the rail can be firmly seated on the play surface when the hospital fold side pocket technique is used. Of course, you can cover the rail using the no-fold valley style treatment as well. Each cushion block blank is run through a molding machine with precisely ground knives that assure consistent and correct profiles for each style of table. The all-important alignment bead on the face is designed into each profile so that the cushions stay bonded at the correct height even after years of play. One important aspect of the alignment bead is that it provides support for the cushion rubber when patrons or guests sit on the table. On the back of the cushion block is the all-important ridge. This feature causes the rail to be firmly seated against the cabinet at the bolt-up points. Several advantages are that the rail plays better because there is less loss of energy during ball impact, the t-nut is less likely to pull through, which in turn prevents premature rail splitting. During the manufacturing process, the ridge is removed at the very end of each rail to allow for the necessary cloth folds and staples used during the covering process. You will be amazed how easily and beautifully Ridgeback rails are to recover! Only the highest quality t-nuts are used. Each t-nut is fitted into a hole that is precisely drilled on an automatic machine that positions the hole in the correct position longitudinally and vertically so that the rails bolt onto the table easily. The hole depth is also machine controlled so that the t-nut provides the most grip and resistance to pull-through possible. The Ridgeback and the t-nut are designed so that the t-nut has a solid bearing point against the cabinet. Each t-nut is flared, creating a guide for the rail bolt as it is being installed. Additionally, the flare prevents the t-nut from spinning or pushing out while the rails are being installed on the table. Most important note of all! – The most amazing thing about this rail is the ridge on the backside that goes end to end. The traditional valley OEM rail does not have this ridge through the middle making the cavity on the original Valley OEM rails hollow. By Ridgeback adding this ridge through the middle on the back when the rail bolts are installed, this ridge is now flushed up against the table making another point of contact which is right where the rail bolt goes into the rail. This produces a rail without the traditional thud that is present in the original OEM rails and quiets the table down and makes it play more like a regular table. The rails are quieter than the original OEM rails. 5:30 p. Asia, Australia, Canada, Europe, Germany, Japan, Mexico, South America and United Kingdom. See our return and store policies here. Thank you for your interest in Nielsen’s Billiards. The item “7′ Valley Ridgeback Rails 5 Bolt Pro Edition, Replacement Rails for Valley Tbl” is in sale since Tuesday, December 29, 2015. This item is in the category “Sporting Goods\Indoor Games\Billiards\Tables”. The seller is “joerackem” and is located in Springfield, Illinois. This item can be shipped worldwide.

• Product Type: Professional Edition Ridgeback Rails
• Accessory Type: Replacement Rails
• Exact Table Size: 7 foot table
• NOT OEM: Not OEM, better than OEM
• Pocketcushion facing thickness: 5.5mm (.22 inches)
• Model: 7′ Valley 5 Bolt Professional Edition
• Country/Region of Manufacture: United States
• MPN: RBR7V5BP
• Brand: Ridgeback Rail
• Table Size: 7 ft.

Antique heavy iron pool table rail bolt wrench. There is no makers name. Measures 4 ¼ by 4. Wood knob is 2 in diameter. Wrench has patina and marks consistent with use and age. Please see photos for condition. All sales are final. Please view our other auctions. The item “Antique Pool Table Rail Bolt Wrench Tool” is in sale since Wednesday, September 30, 2015. This item is in the category “Sporting Goods\Indoor Games\Billiards\Tables”. The seller is “nosprings” and is located in West Warwick, Rhode Island. This item can be shipped to United States.

• Country/Region of Manufacture: United States

Recent searches

• https://yourbilliardstables biz/2015/10/02/antique-pool-table-rail-bolt-wrench-tool/

Get vendio gallery – now free! Rare – eight replacement hole covers. Some of these sizes are extremely hard to be replaced. These cover (push into) the bolt or screw holes of the cushions, and when recovering a table, some may snap when removed, or perhaps even be missing from the start. They are made from timber on the lathe. (maybe pine / kwilla / meranti). Generally, perhaps, the larger the table, the larger the “plug” needed. Largest size is 25mm (one inch) 10mm thick, “coved” to the edges, appprox 4mm thick at the edge with another 4mm depth of the plug into the hole. The smaller sizes have the similar shape (but obviously not same sizes). Please select (and ask for when purchasing). The size variations are shown below, and they are the size of the hole on the cushion, there is a lip as well. A: 25mm (1 = 1 inch) hole (this is the inside diam of the hole). B: 19mm (3/4) hole. C: 16mm (5/8) hole. D: 13mm (1/2) hole. E: (new) for a 3/8 hole. We also have many other “odd” sizes, and some are the result of many years of recovering tables, where we had to enlarge the hole size in the cushions because the original plug / cover size was not available, so we took away the remaining few original “odd-ball” sizes (including plastic) and inserted the new (larger) size. We have come across bits & pieces so many times!!! Just ask, we may (or may not) have the exact item for the older tables, that also includes brackets and empire rail parts. You can re-size as well, and bring the hole to a “modern size” instead of staying with the traditional sizes. The outside diam of the plugs are 4mm larger. There is generally a 2mm lip. Between the inside & outside of the plug. Posted now with new stronger recyclable packing. Available from outback billiards. We are a fully australian entity. (the guy who owns this rock-show is me). And we also make unique style pens. Based in eagleby queensland. We have been associated with the billiard industry for over 40 years, and we are. An agent for any overseas entity. We post daily and rely on the post office to deliver on time for you.The item “BILLIARD & POOL TABLE RAIL BOLT COVERS EIGHT (8) SCREW BOLT HOLE COVER PLUGS” is in sale since Friday, January 16, 2015. This item is in the category “Sporting Goods\Snooker, Pool, Billiards\Accessories, Decor\Other”. The seller is “taxilyall” and is located in Brisbane, Queensland. This item can be shipped worldwide.

Pool table nylon foot. Nylon adjustable foot, includes t-nut pictured. Price is per foot, add how many you would like in the quantity box.The item “Pool Snooker Billiard Table Parts, Nylon Adjustable Foot, Bolt, T-Nut. 65mm” is in sale since Sunday, July 27, 2014. This item is in the category “Sporting Goods\Snooker, Pool, Billiards\Cues”. The seller is “poolroomsupplies” and is located in Goonellabah, New South Wales. This item can be shipped worldwide.

Get vendio gallery – now free! Rare – six replacement hole covers. Some sizes may be unable to be replaced.

These cover (push into) the bolt or screw holes of the cushions, and when recovering a table, some may snap when removed, or perhaps even be missing from the start. They are made from timber on the lathe.

Please select (and ask for when purchasing). The size you need for the hole on your table. A: 25mm (1 = 1 inch) hole (this is the inside diam of the hole)- or. E: (new) for a 3/8 hole. We also have many other “odd” sizes, and some are the result of many years of recovering tables, where we had to enlarge the hole size in the cushions because the original plug / cover size was not available, so we took away the remaining few original “odd-ball” sizes (including plastic) and inserted the new (larger) size. We have come across bits & pieces so many times!!!

Just ask, we may (or may not) have the exact item for the older tables, that also includes brackets and empire rail parts. The outside diam of the plugs are 4mm larger.

There is generally a 2mm lip. Between the inside & outside of the plug. Posted now with new stronger recyclable packing. We are a fully australian entity. (the guy who owns this rock-show is me). We have had that ridiculous stupid foolish act imposed on us a few times. The biggest problem we have.

If you have a problem, always ask, that’s what were here for, we wont ignore your question. Hey, that’s enough bitching !! And we also make unique style pens. We have been associated with the billiard industry for over 40 years, and we are.

An agent for any overseas entity. We post daily and rely on the post office to deliver on time for you.